Privacy Fence Installation in Woodinville, WA
Privacy fence installation is one of the most requested projects we take on. Whether you’re blocking a neighbor’s sight line, reducing road noise, or creating a yard where your family can relax without feeling watched — a privacy fence solves the problem.
Suburban lots in the greater Seattle area run close together. As people invest more in outdoor living — patios, pergolas, outdoor kitchens — a backyard without a privacy fence starts to feel incomplete. Demand grows every year, and it’s not slowing down.
Wood vs. Vinyl Privacy
The two most popular privacy materials in the Pacific Northwest — we install both and help you weigh the tradeoffs.
Full Panel Wood (Cedar)
The most popular option here. Tight-board or board-on-board gives complete coverage, and cedar’s warmth fits the landscape. Naturally rot-resistant, takes stain beautifully, and a well-maintained cedar privacy fence lasts 20 years or more. We use quality cedar — not the cheapest boards, which catch up with you fast in this climate.
Pressure-Treated Wood
A solid budget-friendly alternative, particularly for posts and framing. It lasts well when installed correctly, though it doesn’t have the same finished look as cedar.
Vinyl — No Maintenance
Doesn’t rot, never needs staining or painting, won’t splinter. A garden hose is about all it ever needs. Costs more upfront and has a cleaner, more uniform look — a smart choice for busy families or rental properties.
We Install All Three
Cedar, pressure-treated, or vinyl — we walk you through the tradeoffs for your specific situation when we come out for the estimate. No pushing you toward one just because.
How Tall Should Your Privacy Fence Be?
We check local regulations before we build, and we’ll tell you what your city allows upfront.
Standard Residential
The most common height and the most widely permitted across King & Snohomish County. Full standing privacy from neighbors at grade level — the default we quote unless you ask for different.
Extra Privacy (Where Allowed)
Some cities allow up to 8 feet in rear yards — useful on sloped lots where a neighbor’s yard is elevated, or where a second-story deck overlooks your backyard.
Front & Street-Facing
Fences in front yards or along street-facing lines are usually restricted to 4 feet — sometimes 3.5 for solid panels. Rules vary by municipality, so it’s worth asking first.
What to Think About
A few things worth considering as you plan your privacy fence project. We walk through all of it with you at the estimate — so there are no surprises once the posts go in.
Get Your Free EstimateNeighbor Sight Lines
Where exactly do you need coverage? A 6-foot fence handles most situations — but a second-story deck next door may call for more height or alternate placement.
HOA Rules
Check your CC&Rs before committing to a style or height — some HOAs restrict materials, colors, or heights. We build to whatever specs are required once you have that sorted.
Permits
Most cities require a permit for fences over a certain height, especially over 6 feet. We handle this as part of our process and tell you what’s required at the estimate.
Grade Changes
Sloped yards require more thought. We can follow the slope with the fence line or step it in sections, depending on terrain and your preference.
A well-built privacy fence does more than block the view. Solid panels reduce ambient noise — not soundproofing, but enough to take the edge off road traffic. It blocks wind, which makes outdoor space more usable on blustery days. And there’s the simple value of a defined, enclosed space — kids and pets stay in the yard, and the backyard becomes a room you actually spend time in rather than open ground behind the house.
Privacy Fence FAQ
How tall can a privacy fence be in Woodinville, WA?
In most residential zones in Woodinville and King County, the standard limit for rear and side yard fences is 6 feet. Some areas allow up to 8 feet in rear yards with or without a permit, depending on the zone. Front yard fences along the street are typically limited to 3.5 to 4 feet. These rules can vary by parcel, zone, and proximity to the street, so we always check the specific requirements for your address before we start. If you have a particular height in mind, mention it when you call and we’ll look into what’s allowed for your property.
What’s the best privacy fence material for Washington?
For most homeowners in the Pacific Northwest, cedar is the best combination of performance, appearance, and value. It’s naturally moisture-resistant, it looks great, and it holds up well in our wet winters when properly maintained. Vinyl is the better choice if you want zero maintenance — it lasts just as long (or longer) and never needs sealing or staining. Pressure-treated wood is a solid budget option, though it doesn’t have the same finished look as cedar. We install all three and can walk you through the tradeoffs for your specific situation when we come out for the estimate.
Do I need a permit for a privacy fence?
It depends on the city and the height. In Woodinville, Kirkland, Bothell, and most other cities in King and Snohomish County, fences under 6 feet typically don’t require a permit. Fences at or over 6 feet often do — and this applies even more when the fence is close to a property line or a right-of-way. Some cities have additional rules for corner lots. We check permit requirements for every project during the estimate process. If a permit is needed, we factor that into the timeline and cost so you’re not caught off guard. Never skip a required permit — it can cause problems when you sell the property.
Get Your Free Privacy Fence Estimate
We build fences the way we’d want our own built — solid posts, quality materials, and clean finished work. We’ll come out, take a look, and give you a straight number.
Family-owned fence contractor serving Woodinville, Kirkland, Bothell, Bellevue, Redmond, Seattle & surrounding areas.